Here, you will find a summary of the technical features of our wire drawing tools. If you require further information or you would like special modifications, please contact us.
NWS drawing tool | NWM-74 drawing tools | NWM-81/83 drawing tools |
---|---|---|
thoroughly hardened to 65 HRC±2, can be repeatedly re-ground | variable layer thicknesses up to over 1.5 mm for coarse drawing, and through this can be repeatedly re-ground | layer thickness approx. 0.8 mm, and through this can be repeatedly re-ground |
drawing surfaces are ground and polished, roughness depths according to requirements < 0.05 μ Ra | drawing surfaces are diamond ground and polished, roughness depths: standard < 0.10 μ Ra, as needed < 0.05 μ Ra | drawing surfaces are diamond ground and polished, roughness depths: standard < 0.10 μ Ra, |
easy to service and uncomplicated, without adhesive, screw-in or plug-in connectors | easy to service and uncomplicated, without adhesive, screw-in or plug-in connectors | easy to service and uncomplicated, without adhesive, screw-in or plug-in connectors |
compact and robust | compact and robust | compact and robust |
resistant to impact and fracturing | resistant to impact and fracturing | resistant to impact and fracturing |
NWK-78 drawing tools | NWZ/A drawing tools | NW wire guide rollers |
---|---|---|
layer thickness approx. 0.25 mm | solid ceramic rings up to a diameter of 500 mm can be supplied | layer thickness up to 0.3 mm |
diamond ground surface with roughness values of up to 0.15 μ Ra | diamond ground surface with roughness values < 0.10 μ Ra | wire guidance groove is coated so as to be resistant to wear and tear and polished |
through a high tech process, a thick layer is achieved as well as an adhesive compound with the base material | easy to service and safe | can be used in wet or dry areas |
non-conductive | can be re-ground | |
handled in the same way as ceramic materials | in the case of composite constructions, the ceramic rings can be exchanged individually | optionally with ballbearings or plugged-in ‘Seeger ring’ grooves for re-using available bearings |
used drawing levels can be re-coated | aluminium base plate has a low own weight and a low moment of inertia |